Home → Top Products → Expansion Modules
Top products for: Expansion Modules
 |
1 -Hewlett Packard (J4111A) Expansion Module The HP ProCurve Switch Modules are components that you can add to an HP ProCurve switch to provide a variety of network connectivity options.??This is a 10/100Base-T module for Hewlett Packard's ProCurve Switch 1600M and 8000M with 8 twisted-pair MDI-X ports with RJ-45 connectors for 10 Mbps or 100 Mbps operation over unshielded (UTP)or shielded(STP) twisted-pair cable. The HP ProCurve Switch Modules have the following features: auto-enabled ports-the ports are all configured to be ready for network operation as soon as a viable network cable is connected; auto-configuration-a default configuration is applied to the module when the switch is powered on and the module passes self test; this default configuration works well for most network installations; LEDs that provide information on the link status, network activity, connection bandwidth, and communication mode (half or full duplex); "hot swap" operation-you can add a module or replace a module without having to shut down the... 0 reviews |
 |
2 -Hewlett Packard (410570-B21) (410570B21) Expansion Module Dual Core Intel® Xeon® 5110 processor with 4MB Level 2 cache (2MB per core) up to two processors supported. Up to 32 GB PC2-5300 Fully Buffered DIMMs (DDR2-667) with 4:1 and 2:1 interleaving available, online spare and mirrored memory capabilities. (8) small form factor (SFF) hot-plug drive bays to support Serial-attached SCSI (SAS) and Serial ATA (SATA) drives. 0 reviews |
 |
3 -Cisco (VWIC2-2MFT-T1/E1) (VWIC22MFTT1E1) Expansion Module This flexible, multiservice solution supports multiple data, voice, and integrated data and voice applications, facilitating the migration from data only or channelized data and voice to packet voice solutions and simplifying deployment, management, and sparing. 0 reviews |
 |
4 -Cisco (NM-2W) Expansion Module Cisco Systems is the worldwide leader in networking for the Internet. Cisco's Internet Protocol-based (IP) networking solutions are the foundation of the Internet and most corporate, education, and government networks around the world. Cisco provides the broadest line of solutions for transporting data, voice and video within buildings, across campuses, or around the world. Cisco solutions ensure that networks both public and private operate with maximum performance, security, and flexibility. In addition, Cisco solutions are the basis for most large, complex networks used by corporations, public institutions, telecommunication companies, and are found in a growing number of medium-sized commercial enterprises. 0 reviews |
 |
5 -Cisco Interface Module 32-port Serial (NM-32A=) Expansion Module Cisco Systems is the worldwide leader in networking for the Internet. Cisco's Internet Protocol-based (IP) networking solutions are the foundation of the Internet and most corporate, education, and government networks around the world. Cisco provides the broadest line of solutions for transporting data, voice and video within buildings, across campuses, or around the world. Cisco solutions ensure that networks both public and private operate with maximum performance, security, and flexibility. In addition, Cisco solutions are the basis for most large, complex networks used by corporations, public institutions, telecommunication companies, and are found in a growing number of medium-sized commercial enterprises. 0 reviews |
 |
6 -Cisco GBIC 1000Base-BZX (WS-G5487=) Expansion Module The WS-G5487, 1000BaseZX operates on ordinary single mode fiber optic link spans of up to 70 km in length. Link spans of up to 100 km are possible using premium single mode fiber or dispersion shifted single mode fiber (premium single mode fiber has a lower attenuation per unit length than ordinary single mode fiber; dispersion shifted single mode fiber has both lower attenuation per unit length, and less dispersion).??The WS-G5487 must be coupled to single mode fiber optic cable, which is the type of cable typically used in long haul telecommunications applications. The WS-G5487 will not operate correctly when coupled to multi-mode fiber, and it is not intended to be used in application environments (e.g. building backbones, horizontal cabling) where multi-mode fiber is frequently used.??The WS-G5487 is intended to be used as a Physical Medium Dependent (PMD) component for Gigabit Ethernet interfaces, as found on various switch and router products. It will operate at a signaling r... 0 reviews |
 |
7 -Cisco (PA4T) Expansion Module The four-port adapter (PA-4T+) provides four synchronous serial ports. Each port supports full-duplex operations at T1 and E1 speeds. A single port can support up to E2 speeds. Each port also supports a variety of interface types, determined by the separately purchased cable type connected to it. Supported interfaces include EIA/TIA-232, EIA/TIA-449, V.35, X.21, and EIA-530, allowing flexible deployments as either DCE or DTE equipment. The four-port adapter is the most cost-effective solution for low-traffic WAN connections or remote Cisco 7200 installations. The PA-4T+ is supported on the Cisco 7200, C7301, C7304, C7500 and C7600. The PA-4T+ port adapter requires only a single slot in a Cisco 7200 Series and 7301 routers. For the Cisco 7304, it requires the port adapter carrier card option. For Cisco 7500 Series routers, it requires one of the two available adapter slots on a Versatile Interface Processor (VIP2) and an Enhanced FlexWan on the Cisco 7600. 0 reviews |
 |
8 -Cisco (WIC-1ENET=) Expansion Module Cisco is the worldwide leader in networking for the Internet. Cisco's Internet Protocol-based (IP) networking solutions are the foundation of the Internet and most corporate, education, and government networks around the world. Cisco provides the broadest line of solutions for transporting data, voice and video within buildings, across campuses, or around the world. Today, the Internet and computer networking are an essential part of business, learning and personal communications and entertainment. Virtually all messages or transactions passing over the Internet are carried quickly and securely through Cisco equipment. Cisco solutions ensure that networks both public and private operate with maximum performance, security, and flexibility. 0 reviews |
 |
9 -Hewlett Packard (289564-001) (289564001) Expansion Module 0 reviews |
 |
10 -Compaq (157825001) Expansion Module 0 reviews |
 |
11 -Cisco (PA-A1-OC3SM) Expansion Module Asynchronous Transfer Mode (ATM) port adapters are available on Cisco 7200 series routers, on the second-generation Versatile Interface Processor (VIP2) in Cisco 7500 series routers, and in Cisco 7000 series routers with the 7000 Series Route Switch Processor (RSP7000) and 7000 Series Chassis Interface (RSP7000CI). ??The ATM port adapter provides a single SONET/SDH OC-3 full-duplex interface (either multimode or single-mode intermediate reach) and supports data rates of up to 155 Mbps bidirectionally. The ATM port adapter connects to a SONET/SDH multimode or SONET/STC-3C single-mode optical fiber cable (STS-3C or STM-1 physical layer) to connect the router to an external DSU (an ATM network). The ATM port adapter supports the following features: segmentation and Reassembly (SAR) of up to 512 buffers simultaneously, where each buffer represents a packet; up to 256 transmit buffers for simultaneous fragmentation; up to 2, 048 SAR virtual circuits (VCs); ATM adaptation layer (AAL) 5; ... 0 reviews |
 |
12 -Panasonic KX-TA82483 (KXTA82483) Expansion Module The Panasonic 8 x 24 Phone System supports three incoming lines and eight telephone stations out of the box, but just by installing the 3-CO x 8-Extension Expansion Card into the central hub, your business will be able to grow expansively, adding support to up to three additional incoming lines and eight additional phone extensions. The phone system is sold separately. 0 reviews |
 |
13 -Cisco (HWIC-4T=) (HWIC4T) Expansion Module Cisco serial and asynchronous high-speed WAN interface cards (HWICs) provide highly flexible connections for Cisco 1800, 2800, and 3800 series integrated services routers. These HWICS help customers enable applications such as WAN aggregation, legacy protocol transport, console server, and dial access server. Customers can mix and match HWICs to tailor cost-effective solutions for common networking problems such as remote network management, external dial modem access, low-density WAN aggregation, legacy protocol transport and high port density support. Cisco 1800/2800/3800 series 4-Port Serial High-Speed WAN Interface Card (HWIC-4T)-Four high-speed serial ports. 0 reviews |
 |
14 -Cisco Carrier Card (7300-CC-PA=) Expansion Module The Cisco 7304 Port Adapter Carrier Card combines the industry-proven Cisco 7200 and 7500 series port adapters with the performance and scalability of the Cisco 7304 Router. ??Each Cisco 7304 Port Adapter Carrier Card can accept one Cisco 7200 and 7500 series WAN/LAN port adapters and with an innovative architecture adapts the port adapter so that it integrates with the Cisco 7304 advanced processing architecture. The flexible media and technology support provides a wide array of connectivity options to enable delivery of next-generation applications while providing an easy migration path for existing networks. 0 reviews |
 |
15 -Cisco CP-7914= Expansion Module Call coverage is a critical capability for administrative assistants and others who must monitor, manage, and cover the various status of calls. This requires the ability to instantly determine the status of a number of lines beyond the six-line capability of the Cisco IP Phone 7960.The Cisco IP Phone Expansion Module 7914 extends the capabilities of the Cisco IP Phone 7960 with additional buttons and an LCD display. With this expansion module, you add 14 buttons to the existing six buttons of the Cisco IP Phone 7960, increasing the total number of buttons to 20 with one module or 34 when you add two Cisco 7914 Expansion Modules. You can use up to two Cisco 7914 Expansion Modules with a Cisco IP Phone 7960 .The large LCD display of the Cisco IP Phone Expansion Module allows for quick and easy identification of associated buttons. Using the Settings menu of the Cisco IP Phone 7960, you can adjust the contrast of the individual LCDs for the Cisco 7960 phone and Cisco 7914 Expansion Module according to your pref... 0 reviews |
 |
16 -Canopus EDIUS NX for HDV Expansion Kit (77010167100) Expansion Module The EDIUS NX for HDV Expansion Kit unleashes the full HD editing power of the EDIUS NX for HDV solution, providing editors with realtime, full-resolution HD component video output. With this additional board, editors can enjoy constant, high-quality 1080i output to any HD component monitor. The EDIUS NX for HDV Expansion Kit delivers the best possible preview of HD compositions and effects, without the expense of SDI-based hardware and displays. 0 reviews |
 |
17 -Hewlett Packard Procurve XL (J4820B) Expansion Module The HP Procurve Switch XL Modules are components that you can add to an HP Procurve XL switch to provide a variety of network connectivity options. HP Procurve Switch XL 24p 10/100Base-T Module (J4820A) features 24 twisted-pair ports with RJ-45 connectors for 10 Mbps or 100 Mbps operation over 100-ohm unshielded (UTP) or shielded (STP) twisted-pair cable - all ports have the HP Auto-MDIX feature. 0 reviews |
 |
18 -Cisco Line Card (WS-X4548-GB-RJ45=) Expansion Module Cisco is the worldwide leader in networking for the Internet. Cisco provides the broadest line of solutions for transporting data, voice and video within buildings, across campuses, or around the world. Cisco solutions ensure that networks both public and private operate with maximum performance, security, and flexibility.??The Cisco Catalyst 4500 Series 48-Port 10/100/1000 RJ-45 module has efficient power draw. 0 reviews |
 |
19 -Cisco Interface Module 1-port HSSI (NM-1HSSI=) Expansion Module Cisco Systems is the worldwide leader in networking for the Internet. Cisco's Internet Protocol-based (IP) networking solutions are the foundation of the Internet and most corporate, education, and government networks around the world. Cisco provides the broadest line of solutions for transporting data, voice and video within buildings, across campuses, or around the world. Cisco solutions ensure that networks both public and private operate with maximum performance, security, and flexibility. In addition, Cisco solutions are the basis for most large, complex networks used by corporations, public institutions, telecommunication companies, and are found in a growing number of medium-sized commercial enterprises. 0 reviews |
 |
20 -Cisco NM-HDV-1E1-30E Expansion Module Cabling: Network... 0 reviews |
 |
21 -Hewlett Packard (409347-B21) (409347B21) Expansion Module JXE-4FE-TX-S 4x10/100 EPIM SSG5004 PORT FAST ETHERNET ENHANCED PIM - SPARE.SUITS SSG500 SERIES.Additional Product InformationPI DATE : November 2006PRODUCT : 4 Port Fast Ethernet Enhanced PIMI/FACE : 4 x 10/100 copper Ethernet Port Auto sensing for 10 Mbps and 100 Mbps full duplex & half duplex Auto correcting MDI/MDIX 4 RJ-45 connectors Link and Activity LEDs* Juniper Networks Ethernet Enhanced Physical Interface Modules (EPIMs)* The SSG 550 can support up to four EPIMs plus two PIMs (DS3, T1/E1, or Serial) while the SSG 520 can support up to two EPIMs plus four PIMs.* Supports full VLAN ID range (1-4096) with the total configured being limited to the maximum number of VLANs specified by the base systems.* EPIM configuration can be accomplished through CLI, WebUI or NetScreen Security-ManaWarranty Notes... 0 reviews |
 |
22 -3Com (3C17710) Expansion Module This module delivers four ports of high-performance Gigabit Ethernet switching over multimode fiber cabling. It supports Layer 2 switching capabilities, virtual LANs and VLAN tagging, multicast filtering, and seven groups of RMON. 0 reviews |
 |
23 -Compaq (192825-001) Expansion Module Plug-In Module, SBus Interface, Cabling: SCSI... 0 reviews |
 |
24 -Cisco (7300-1OC48POS-SMS=) Expansion Module The 1-port OC-48c/STM-16 POS Line Card is well suited as a high-speed uplink in numerous solutions. Examples include use as a WAN uplink for a CPE device to use as an uplink from the edge to the distribution layer or core in various network deployments. Utilizing the Cisco NSE-100 Route Processor on the Cisco 7300, this OC-48c/STM-16 POS Line Card can leverage multi-protocol capability from Cisco IOS, and Parallel eXpress Forwarding (PXF) technology to deliver hardware-accelerated IP network services. 0 reviews |
 |
25 -Cisco (NM-1A-E3) Expansion Module Cisco offers a wide variety of connectivity, expansion and upgrade modules to accommodate the wide range of application needs in customer networks. Cisco's network modules assure customers that they can choose a connectivity solution that fits their requirements. As modular components, they are easily and inexpensively field-upgradeable, reflecting constantly changing customer requirements. 0 reviews |
 |
26 -Cisco GigaStack (WS-X3500-XL=) Expansion Module GigaStack GBIC is a versatile, low-cost, Gigabit Ethernet stacking GBIC that offers high-speed interconnectivity between Catalyst 3500 series XL and Gigabit Ethernet-enabled Catalyst 2900 series XL switches. The GigaStack GBIC is ideal for performance- and cost-conscious customers who require an independent stack bus to interconnect multiple Catalyst 3500 series XL and Gigabit Ethernet-enabled Catalyst 2900 XL switches. 0 reviews |
 |
27 -Cisco Interface Module (NM-8A/S) Expansion Module While the pace of change in network technology continues to increase, global deregulation of telecommunications has allowed more service providers to compete for data, voice, and video network services. Only companies who have designed their network infrastructures with these factors in mind will be able to benefit from the lower prices caused by increased competition and protect themselves from "technology lockout" in the future.??The many LAN connectivity modules for the Cisco 3600 platform are designed to accommodate a range of application needs in customer networks. The LAN network module family assures customers that they can choose a LAN connectivity solution that fits their requirements. Available as network modules, LAN connectivity options offer several port densities, media options, and speeds. As modular components, they are easily and inexpensively field-upgradable as customer requirements change. 0 reviews |
 |
28 -IBM X3650 (40K1908) Expansion Module As a global leader in the PC market, IBM develops, manufactures and markets cutting-edge, reliable, high-quality PC products and value-added professional services that provide customers around the world with smarter ways to be productive and competitive. 0 reviews |
 |
29 -Cisco (HWIC-4A/S=) (HWIC4AS) Expansion Module Serial and asynchronous high-speed WAN interface cards (HWICs) provide highly flexible connections for Cisco 1800, 2800, and 3800 series integrated services routers. These HWICs help customers to enable applications such as WAN aggregation, legacy protocol transport, console server, and dial access server. Customers can mix and match HWICs to tailor cost-effective solutions for common networking problems such as remote network management, external dial-modem access, low-density WAN aggregation, legacy protocol transport, and high port density support. 0 reviews |
 |
30 -Cisco NetFlow Services Card (WS-F4531=) Expansion Module The NetFlow Services Card adds NetFlow accounting to the Catalyst 4500 series. NetFlow accounting collects statistics on a per-flow basis. A flow is defined as a source IP address, destination IP address, IP protocol type, source Layer 4 port, and destination Layer 4 port. Without the NetFlow Services Card, the Supervisor Engine IV on the Catalyst 4500 does not support NetFlow accounting.??The NetFlow Services Card is a configurable option on the Supervisor Engine IV for the Catalyst 4500 platform and is supported in a redundant supervisor configuration if both supervisors have a NetFlow Services Card. 0 reviews |
 |
31 -Cisco (NM-CEM-4TE1) Expansion Module The Circuit Emulation over IP (CEoIP) network module (NM-CEM-4TE1) for the Cisco 3745, 3725, 3660, 2691, and 2600XM multiservice platforms provides an innovative CEoIP service offering. These network modules provide bit-transparent data transport that is completely protocol-independent. For the first time, this allows network administrators to take advantage of their existing IP network to provide leased-line emulation services, or to carry data streams or protocols that do not meet the format requirements of other multiservice platform interfaces. 0 reviews |
 |
32 -Nortel (AL2033010) Expansion Module This is the BayStack 400-ST1 cascade module for use with BayStack switches. 0 reviews |
 |
33 -Cisco 7200 (C7200-I/O-2FE/E) Expansion Module Cisco Systems offers its input/output controller with Fast ethernet port which is designed for Cisco 7200 series modular routers. 0 reviews |
 |
34 -Cisco (PA-MC-T3) Expansion Module The PA-MC-E3 provides one multi-channel E3, medium-speed serial interface. The physical E3 link on the PA-MC-E3 port adapter consists of two female BNC connectors, one for receive (RX) and one for transmit (TX). You must use 75-ohm coaxial interface cables with male BNC connectors to connect the PA-MC-E3 interface with external E3 equipment. The PA-MC-E3 divides the E3 signal stream into four multi-channel E2 data channels and then into 16 E1 lines. The E3 is designed to comply with the CCITT/ITU G.703 physical layer standard. E3 provides access to services at E3 (34.368 Mbps) data rates, transferring data bidirectionally. 0 reviews |
 |
35 -Nortel (AL2033005) Expansion Module BayStack Switches represent flexible and expendable platform ready for further expansion and additional features implementation. Nortel Network manufactures various expansion modules, which allow BayStack Switches to satisfy different and changing specific customers needs. 0 reviews |
 |
36 -Cisco XENPAK (xenpak-10gb-lx4=) Expansion Module The range of Cisco 10GBASE XENPAK modules offers customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. Cisco 10GBASE XENPAK modules provide flexibility of interface choice and support 10GBASE Ethernet. These hot-swappable input/output devices plug into an Ethernet XENPAK port of a Cisco switch or router to link the port with the network and support the Cisco quality identification (ID) feature that enables a Cisco switch or router to identify whether the module is a Cisco certified and tested XENPAK module. Cisco 10GBASE XENPAK modules also support pay-as-you-populate model. 0 reviews |
 |
37 -Cisco Catalyst 2900 (WS-X2924-XL-V) Expansion Module The 100BaseFX hot-swappable switch module has four switched 100BaseFX ports for 100-Mbps fiber-optic connectivity. The ports can run in half-duplex or full-duplex modes. ??The ports support the IEEE 802.3u 100BaseT standard and use standard duplex SC connectors. Per-port data rates of up to 200 Mbps in full-duplex mode. It is managable through an SNMP management station, the Cisco IOS command-line interface (CLI), or the web-based Cisco Visual Switch Manager. It has Fast EtherChannel support on all ports, IEEE 802.1Q virtual LAN (VLAN) trunk support and ISL trunk support. 0 reviews |
 |
38 -3Com (3C16975) Expansion Module Scale the performance of your Ethernet/Fast Ethernet network to gigabit speeds by adding this module to 3COM SuperStack II Switch 1100s and SuperStack 3 Switch 3300s. This module provides a high-performance interworkgroup or workgroup-to-backbone Gigabit Ethernet connection. Dual links ensure resilience. 0 reviews |
 |
39 -Cisco (PA-MCX-8TE1) (PA-MCX-8TE1=) Expansion Module The MIX-enabled T1/E1 port adapters provide the ability to integrate voice and data on the same T1/E1 interface without the need for an external time-division multiplexing (TDM) device. With the "drop and insert" capability, DS0-level grooming is supported, thus providing cost-effective WAN access. Ports can be configured as voice, data, or both, depending on the application requirements. Powerful management capabilities are provided with the Cisco Voice Manager 2.0 Web-based user interface for provisioning, configuration, and monitoring functions.??The MIX-enabled T1/E1 port adapter enhances the multi-service solutions enabled by the enhanced digital voice adapters available on the Cisco 7200 VXR series of routers. By using the TDM capabilities of the Cisco 7200 VXR, the MIX-enabled T1/E1 port adapter can maximize the use of digital-signal-processor (DSP) resources on the enhanced digital voice adapters. The MIX-enabled T1/E1 port adapter enables the use of the DSP resource pool o... 0 reviews |
 |
40 -3Com (3C200700) Expansion Module The ATM module provides a single OC-3 155 Mbps interface (for multimode fiber) in a high-speed slot on the CoreBuilder system. You can mix and match two high-speed modules in any configuration, including ATM and FDDI, ATM and 100BASE-T, FDDI and 100BASE-T, and FDDI and FDDI. 0 reviews |
 |
41 -3Com (3C16828) Expansion Module The modularity of the 3Com Switch 4005 makes it ideal for Fast Ethernet aggregation of Desktop PC's, or the core of a smaller network. Adding this low-cost, high-performance Fast Ethernet-over-copper module gives you maximum flexibility as your network needs change. 0 reviews |
 |
42 -Cisco Compression Module (AIM-COMPR2=) Expansion Module Data compression technology maximizes bandwidth and increases WAN link throughput by reducing frame size and thereby allowing more data to be transmitted over a link. This feature enables network managers to increase application performance and service availability for end users without costly infrastructure upgrades. Data compression enables service providers to maximize available bandwidth and deliver more services to customers over their existing infrastructure - -enhancing their return on investment.??While software-based compression capabilities can support fractional T1/E1 rates, hardware based compression off-loads the router's processor to deliver even higher levels of throughput. With a compression ratio of up to 4: 1, the Data Compression AIM supports 8Mbps of compressed data throughput without imposing additional traffic latency - -enough to keep two T1 or E1 circuits full of compressed data in both directions simultaneously. And because the Data Compression AIM is fully... 0 reviews |
 |
43 -Hewlett Packard HP (J4852A) Expansion Module The HP networking products deliver industry-leading value as they meet business customers needs in building interoperable networks that are highly available, secure, easy to manage and affordable. A highly performing network is no longer optional and is a core requirement of an always-on business infrastructure connecting servers, storage and clients in an increasingly connected world. 0 reviews |
 |
44 -Cisco (HWIC-AP-AG-A=) (HWICAPAGA) Expansion Module The HWIC-AP-G-x has one onboard radio operating in the 2.4 GHz band meeting IEEE 802.11b and 802.11g standards. It supports data rates of up 54 Mbps with three non-overlapping channels. The HWIC-AP-AG-x comprises of 2 individual onboard radios for simultaneous 5 GHz IEEE 802.11a and 2.4GHz IEEE 802.11b/g operation. Each radio supports data rates of up to 54 Mbps and up to fifteen non-overlapping channels (pending country specific regulatory approvals) which simplifies deployments for high capacity wireless networks. Both models feature 802.11g radios which are backward compatible with legacy 802.11b clients providing investment protection for existing equipment. 0 reviews |
 |
45 -Cisco (PA-POS-1OC3) (PAPOS1OC3) Expansion Module The PA-POS-1OC3 provides a single Packet-over-SONET (POS) port in a single port adapter slot. The port functions as a single independent OC-3c/STM1 port. The PA-POS-1OC3 is used as a direct connection between the supported router or switch platform and an external network. The PA-POS-1OC3 is used with the Cisco 7204VXR, the Cisco 7206VXR, and the Cisco 7301 router. 0 reviews |
 |
46 -Hewlett Packard ProCurve Gigabit LX/SX Module (J4145A) Expansion Module Expansion modules are offered with 10/100 Mbps or 1000 Mbps ports. Expansion modules provide additional port density to the system. The module can be installed within any slot. 0 reviews |
 |
47 -Cisco Interface Module 1-port Serial (SM25-5IN1=) Expansion Module This five-in-one synchronous serial WAN module is designed for the Cisco 2524 and 2525 routers. The Cisco 2524 and 2525 provide LAN and WAN access in a low-cost modular router platform that can grow with your internetworking needs. Both routers can accommodate up to three WAN modules - two synchronous serial and one ISDN. ??The five-in-one synchronous serial WAN module gets its name from the five types of signaling it supports, which include: EIA/TIA-232, EIA/TIA-449, V.35, X.21 and EIA-530. You can order a DB-60 shielded serial transition cable. The router end of the cable has a DB-60 connector; the other end of the cable has the appropriate connector for the standard interface you specify. 0 reviews |
 |
48 -Cisco Catalyst 4500 (WS-X401310-GE) (WSX401310GE) Expansion Module The Supervisor Engine II-Plus-10GE complements the Catalyst 4500 Series Supervisor Engine portfolio by delivering 10-Gigabit Ethernet capability in an enhanced Layer 2 supervisor engine. The Supervisor Engine II-Plus-10GE is equipped with both Gigabit (SFP) and line-rate 10-Gigabit (X2) ports, providing 10-Gigabit scalability and an easy and cost-efficient migration to 10-Gigabit Ethernet. The Supervisor Engine II-Plus-10GE provides 108Gbps of nonblocking enhanced Layer 2 switching and 81mpps throughput with basic Layer 3 and Layer 4 intelligent services. It helps enable resilient, multilayer switching solutions for converged data, voice and video networks. The Supervisor Engine II-Plus-10GE is designed with ample performance and resources to allow customers to deploy network-wide intelligent services, such as advanced quality of service (QoS), advanced security and management features, without impacting switching performance. 0 reviews |
 |
49 -Nortel Combination Fiber 6-port Services Cartridge (NTBB25GA-93) Expansion Module Plug-In Module, Cabling: Fiber... 0 reviews |
 |
50 -Cisco Uplink Module (WS-U5531-FETX) Expansion Module Cisco Systems is the worldwide leader in networking systems. Cisco's networking solutions connect people, computing devices and computer networks, allowing people to access or transfer information without regard to differences in time, place or type of computer system. Cisco offers a variety of connectivity, expansion and upgrade modules and cards. 0 reviews |
 |
51 -Cisco Channel Interface Processor (CX-AIP-E3) Expansion Module The AIP provides a direct connection between the high-speed Cisco Extended Bus (CxBus and CyBus) and external ATM networks. A physical layer interface module (PLIM) on the AIP determines the type of ATM connection. There are no restrictions on slot locations or sequence; you can install an AIP in any available interface processor slot. 0 reviews |
 |
52 -D-link DEM 310GT (DEM-310GT) Expansion Module D-Link is an industry pioneer, market leader, designer and true manufacturer of networking communications and digital home electronic products. Excellence in manufacturing, innovation and a commitment to quality has allowed D-Link to produce cutting-edge, high-performance products within standard-based technologies. The company continues to offer the best value in the connectivity market today by combining high-quality products with the most affordable price point. 0 reviews |
 |
53 -Cisco (WS-X6582-2PA) Expansion Module The Cisco® 7600 Series/Catalyst® 6500 Series Enhanced FlexWAN module (Enhanced FlexWAN) enables high-performance, intelligent metropolitan-area network (MAN) and WAN services. Enterprises and service providers can take advantage of the many types of the Cisco 7000 Series common port adapters for their WAN aggregation and connectivity options, as well as the increased scalability, performance, and rich quality of service (QoS) features offered by the Cisco Enhanced FlexWAN module. 0 reviews |
 |
54 -Hewlett Packard Procurve Switch Vl 100FX Mtrj Module 12 Port 100-FX Mtrj Module (J8763A) Expansion Module ISA Interface, Cabling: Fiber, Network... 0 reviews |
 |
55 -Cisco Catalyst 2900 (WS-X2914-XL-V) Expansion Module The Catalyst 2900 series XL modules can add port density and fiber-optic connectivity to a Catalyst 2900 series network. When installed in a Catalyst 2912MF XL, Catalyst 2916M XL, or Catalyst 2924M XL switch, these modules support switched 10BaseT, 100BaseTX, 100BaseFX, or 1000BaseX connections. The 10BaseT/100BaseTX module autonegotiates the duplex and speed settings of each port to match that of the attached device. The 1000BaseX module autonegotiates the duplex mode only. 0 reviews |
 |
56 -Cisco (PA-2T3=) Expansion Module The PA-T3 and PA-2T3 serial port adapters provide one (PA-T3) or two (PA-2T3) high-speed full-duplex synchronous serial T3 interfaces and integrated data service unit (DSU) functionality. The T3 port adapters can transmit and receive data at T3 rates of up to 45 Mbps and use a 75-ohm coaxial cable to connect to a serial T3 network. Serial network interfaces reside on modular port adapters, which provide a direct connection between the high-speed bus in the router and the external networks. The PA-T3 serial port adapter provides a full-duplex synchronous serial PA-T3 interface for transmitting and receiving data at rates of up to 34 megabits per second (Mbps). 0 reviews |
 |
57 -Cisco (NM-1A-OC3SMI) Expansion Module Cisco Systems is the worldwide leader in networking systems. Cisco's networking solutions connect people, computing devices and computer networks, allowing people to access or transfer information without regard to differences in time, place or type of computer system. Cisco offers a variety of connectivity, expansion and upgrade modules and cards. 0 reviews |
 |
58 -Hewlett Packard ProCurve Switch vl 24-Port Gig-T Module (J8768A) Expansion Module The ProCurve 4200vl Switch Series is a cost-effective, modular chassis switch series for flexible 10/100 and Gigabit copper and fiber LAN connectivity, and represent a high-value alternative to stackable switches. 0 reviews |
 |
59 -Nortel (AL2033002) Expansion Module As demands on the network grow, capacity can easily be increased by inserting additional modules into the switch chassis, or scaling to higher-bandwidth interface modules, or replacing some modules with uprages. That is why Nortel Networks' products feature modular design. ??This is the BayStack 400-2FX 2-port, 100Base-FX MDA module for use in BayStack switches. 0 reviews |
 |
60 -Hewlett Packard ProCurve XL (J4821B) Expansion Module The HP Procurve Switch XL Modules are components that you can add to an HP Procurve XL switch to provide a variety of network connectivity options. HP Procurve Switch XL Mini-GBIC Module features 4 slots for installing any of the supported HP Procurve mini-GBICs... 0 reviews |
 |
61 -Cisco (VWIC2-1MFT-T1-E1) (VWIC21MFTT1E1) Expansion Module 0 reviews |
 |
62 -Cisco CATALYST 4500 (WS-X4248-RJ21V) (WS-X4248-RJ21V=) Expansion Module The new line cards enhance the Cisco Catalyst 4500 Series portfolio by giving customers the flexibility to support either the IEEE 802.3af standard or the Cisco prestandard PoE implementation on the same line card. This ensures backward compatibility with existing Cisco powered devices. All three line cards support up to 15.4 Watts per port on all ports, optional power classifications, and intelligent power-management features. The new cards are compatible with any Catalyst 4500 Series or Catalyst 4000 Series chassis and can be deployed with any Supervisor Engine. Most importantly, the Catalyst 4500 Series has the power supplies and accessories to simultaneously support up to 15.4W per port on every port in any fully loaded Cisco Catalyst 4500 Switch. 0 reviews |
 |
63 -Cisco (PA-MC-STM-1SMI=) Expansion Module The PA-MC-STM-1 is a single-wide STM-1 port adapter designed to address the demand for SDH network connections on the Cisco 7600, 7500, 7200, and FlexWAN modules. The port adapter enables users to channel an STM-1 down to 64 Kbps using a variety of encapsulations on as many as 256 logical channels. The time slots in each E1 can be grouped into several individual logical channels, each of which can carry data with different data link layer protocols. The PA-MC-STM-1 enables service providers to use a single fiber-optic circuit to provision 63 E1s-E1s that normally require 63 separate copper pairs. The PA reduces wiring complexity, and, when spare capacity is available, it enables service providers to "turn up" new E1s without dispatching a technician to the router. For service providers with customers who require smaller circuits, the PA-MC-STM-1 supports as many as 256 channel groups and can provision circuits down to DS0-providing even more flexibility and density. 0 reviews |
 |
64 -Cisco (WS-X5101) Expansion Module The media-independent architecture of the Catalyst 5000 Family supports any type of data communication, including all legacy LAN and Asynchronous Transfer Mode (ATM) switching technologies through a wide range of Ethernet, Fast Ethernet, Gigabit Ethernet, Fiber Distributed Data Interface (FDDI), Token Ring, and ATM switch modules.??Various Switching Modules delivered by Cisco for its Catalyst 5000 Multilayer Switches satisfy the specific customer needs for flexibility and expandability of their Cisco branded network hardware. 0 reviews |
 |
65 -Cisco (PA-MC-E3) Expansion Module The PA-MC-E3 provides one multi-channel E3, medium-speed serial interface. The physical E3 link on the PA-MC-E3 port adapter consists of two female BNC connectors, one for receive (RX) and one for transmit (TX). You must use 75-ohm coaxial interface cables with male BNC connectors to connect the PA-MC-E3 interface with external E3 equipment. The PA-MC-E3 divides the E3 signal stream into four multi-channel E2 data channels and then into 16 E1 lines. The E3 is designed to comply with the CCITT/ITU G.703 physical layer standard. E3 provides access to services at E3 (34.368 Mbps) data rates, transferring data bidirectionally. 0 reviews |
 |
66 -Cisco NM-HDV-2T1-48 (NMHDV2T148) Expansion Module Cabling: Network... 0 reviews |
 |
67 -Cisco (WS-F6K-PFC3BXL=) Expansion Module 0 reviews |
 |
68 -IBM (25R5778) Expansion Module BLADE Interface, Cabling: Network... 0 reviews |
 |
69 -Cisco (WIC-1SHDSL-V3) (WIC1SHDSLV3) Expansion Module The new G.SHDSL WAN interface card (WIC) provides 1-port symmetric high-bit-rate DSL (SHDSL) connectivity to a WAN. G.SHDSL technology offers customers high-speed, symmetrical WAN connectivity at a lower monthly cost than most traditional WAN circuits. Using single or dual-pair copper wires, Cisco access routers with SHDSL interface card, can provide businesses the necessary bandwidth for critical traffic such as voice and videoconferencing, and can allow customers to save money by integrating voice and data traffic on the same WAN link. Service providers can increase subscriber revenue by bundling services and offering differentiated service levels through service-level agreements (SLAs). 0 reviews |
 |
70 -Cisco (PA-8T-232) Expansion Module The PA-8T-232 provides up to eight EIA/TIA-232 synchronous serial interfaces for Catalyst 5000 family switches (that use the Catalyst RSM/VIP2), Catalyst 6000 family switches (that use the Catalyst 6000 family Flex WAN module), Cisco 7000 series and Cisco 7500 series routers (that use the VIP2), Cisco 7100 series routers, and Cisco uBR7200 series routers. The EIA/TIA-232 interfaces provide a direct connection between the high-speed bus in the router and external networks. Each EIA/TIA-232 interface provides full-duplex (FDX) operation at the rate of 64 kilobits per second (kbps). The EIA/TIA-232 interface is most commonly used in the United States. 0 reviews |
 |
71 -Cisco (PA-A1-OC3MM) Expansion Module Asynchronous Transfer Mode (ATM) port adapters are available on Cisco 7200 series routers, on the second-generation Versatile Interface Processor (VIP2) in Cisco 7500 series routers, and in Cisco 7000 series routers with the 7000 Series Route Switch Processor (RSP7000) and 7000 Series Chassis Interface (RSP7000CI). ??The ATM port adapter provides a single SONET/SDH OC-3 full-duplex interface (either multimode or single-mode intermediate reach) and supports data rates of up to 155 Mbps bidirectionally. The ATM port adapter connects to a SONET/SDH multimode or SONET/STC-3C single-mode optical fiber cable (STS-3C or STM-1 physical layer) to connect the router to an external DSU (an ATM network). The ATM port adapter supports the following features: segmentation and Reassembly (SAR) of up to 512 buffers simultaneously, where each buffer represents a packet; up to 256 transmit buffers for simultaneous fragmentation; up to 2, 048 SAR virtual circuits (VCs); ATM adaptation layer (AAL) 5; ... 0 reviews |
 |
72 -3Com (3C16970) Expansion Module Add a cost-effective fiber Fast Ethernet backbone link to your switched workgroup for mission-critical traffic. This module enhances the SuperStack II Switch 1100s and SuperStack 3 Switch 3300s to deliver full-duplex Fast Ethernet performance for demanding users. Multiple units in a stack can share a single high-speed backbone link. 0 reviews |
 |
73 -Avocent Server interface module - Expansion module - serial (0636430017020) Expansion Module RJ-45 Interface, Cabling: Serial... 0 reviews |
 |
74 -Cisco (VWIC22MFTG703) Expansion Module Cisco® Multiflex Trunk Dedicated Echo Cancellation (MFT ECAN) Modules are dedicated resources for the Cisco Enhanced ITU-T G.168 ECAN feature, providing robust echo cancellation performance for demanding network environments. The modules are daughter cards that attach to Cisco Second-generation Multiflex Trunk Voice/WAN Interface Cards (MFT VWIC2 cards). The dedicated ECAN modules are available in 32- and 64-channel configurations, which match the requirements of the 1- and 2-port T1/E1 MFT VWIC2s, respectively. The 64-channel MFT ECAN Module is shown in Figure 1. Figure 2 shows the module attached to a 2 port T1/E1 MFT VWIC2. 0 reviews |
 |
75 -Cisco NM-HDV-2E1-60 Expansion Module Cabling: Network... 0 reviews |
 |
76 -Cisco CATALYST 4500 (WS-X4516) (WS-X4516=) Expansion Module Cisco Catalyst 4500 Series Switches are designed for Enterprise wiring closets, branch offices and Layer 3 distribution points. The Catalyst 4500 Series is comprised of a series of chassis which support three choices of Supervisor Engines and an extensive set of line cards including high density, 10/100, 10/100/1000 (both with 802.3af Power over Ethernet Options), 100-FX, and 1000BASE-X... 0 reviews |
 |
77 -Cisco WS-SVC-CMM (WS-SVC-CMM=) Expansion Module 0 reviews |
 |
78 -Adtran (1200872L1) Expansion Module Adtran's Dual T1/FT1 Network Interface Module (NIM) is for use with NetVanta 3000 series and NetVanta 4305 Access Routers and NetVanta 1224R/STR Switches with integrated routers. 0 reviews |
 |
79 -Cisco NM-1CT1 (NM1CT1) Expansion Module The 1-port channelized T1/ISDN-PRI network module supports a single channelized T1/ISDN PRI connection via a DB-15 connector. 0 reviews |
 |
80 -3Com SuperStack® 3 Switch 4400 (3c17223taa) Expansion Module Scale the performance of your Ethernet/Fast Ethernet network by adding this module to the 3Com® SuperStack® 3 Switch 4400, Switch 4400 FX, Switch 4400 PWR, or Switch 4400 SE 10/100 managed switch. This module provides a resilient, high-performance inter-workgroup or workgroup-to-backbone Gigabit Ethernet connection. 0 reviews |
 |
81 -Cisco NM-1T3/E3 Expansion Module Cisco's Packet-over-T3/E3 network module for the Cisco 2600, 3600, and 3700 series offers the first software-configurable T3/E3 product from Cisco. This flexible network module allows the customer to switch between T3 and E3 applications with a single Cisco IOS command. This feature provides customers with unparalleled investment protection by allowing the service provider or enterprise customer to stock only a single product that can be deployed internationally. The demand for increased bandwidth has led to growth in clear-channel T3/E3 deployment. This new Packet-over T3/E3 network module (part number NM-1T3/E3) eliminates the need for an external data service unit (DSU), reduces provisioning costs, and provides highly manageable T3/E3 line termination. The module provides an integrated line interface unit (LIU) DSU that allows T3 or E3 lines to be directly terminated on a Cisco router, eliminating the need for external DSU equipment. This simplifies the T3/E3 line management, re... 0 reviews |
 |
82 -Cisco (NM-1A-T3=) Expansion Module Cisco is the worldwide leader in networking for the Internet. Cisco's Internet Protocol-based (IP) networking solutions are the foundation of the Internet and most corporate, education, and government networks around the world. Cisco provides the broadest line of solutions for transporting data, voice and video within buildings, across campuses, or around the world. Today, the Internet and computer networking are an essential part of business, learning and personal communications and entertainment. Virtually all messages or transactions passing over the Internet are carried quickly and securely through Cisco equipment. Cisco solutions ensure that networks both public and private operate with maximum performance, security, and flexibility. 0 reviews |
 |
83 -Cisco Interface Module (NM-4A/S) Expansion Module The Cisco 3600 platform offers a wide variety of serial connectivity modules to accommodate the range of application needs in customer networks. The serial network module family for the Cisco 3600 series assures customers that they can choose a serial connectivity solution that fits their requirements. Available as network modules or WAN interface cards, serial connectivity options offer several port densities, synchronous and asynchronous alternatives, and integrated channel service unit/data service unit (CSU/DSU). As modular components, they are easily and inexpensively field upgradable as customer requirements change. ??The four-port asynchronous/synchronous serial network module available for the Cisco 3600 series provides flexible dial support, with each port configurable in synchronous or asynchronous mode, offering mixed-media dial support in a single chassis. In a typical WAN aggregation application, the Cisco 3640 platform can support up to 24 low-speed (up to 128 kbps) s... 0 reviews |
 |
84 -Cisco (WS-X4424-GB-RJ-45=) Expansion Module Cisco provides a wide range of Ethernet and Fast Ethernet switching modules, interface modules and connectivity solutions, with the help of which you can easily build your own network according to your needs. 0 reviews |
 |
85 -Hewlett Packard (273911-B21) Expansion Module The Smart Array 6400 high performance Ultra320, PCI-X controller family provides maximum performance, flexibility, and reliable data protection for HP ProLiant servers, through its unique modular design and support for Advanced Data Guarding (RAID ADG). This new generation performance Smart Array controller again raises the standards of performance, introducing Double Data Rate (DDR) battery-backed write cache architecture and a new RAID engine. 0 reviews |
 |
86 -3Com 7700 (3C16890) Expansion Module Scales to 292 Gigabit or 288 Fast Ethernet ports. Add 10 Gbps (10-Gigabit Ethernet) connections for switch-to-switch links. Choose from 8-slot redundant, 7-slot, and 4-slot chassis configurations. Performance Provides up to 584 Gbps switching performance with local switching on each blade. Helps reduce congestion in the core of the network, improving application response times when accessing data across the network. Prioritize Converged and other Business-Critical Traffic Advanced policy-based Class of Service/ Quality of Service (CoS/QoS), eight priority queues, committed access rates, and bandwidth limiting and filtering enables identification and prioritization of business-critical traffic, such as voice, for optimal network performance. Routing of multicast traffic in hardware on the Switch 7700 helps enable maximum performance for streamed voice and video data. 0 reviews |
 |
87 -Cisco (NM-16A/S) Expansion Module The NM-16A/S combines the rich multi-protocol support of the NM-4A/S and NM-8A/S with higher densities to provide compelling price-per-port solutions for networking applications. In addition to the features of the NM-4A/S and NM-8A/S, the NM-16A/S adds EIA-530A support, and support for physical lead manipulation in the IOS configuration. Lead manipulation allows the user to configure the router to ignore input signals, view the state of input signals, and to monitor the transitions of input signals. 0 reviews |
 |
88 -Cisco (WS-X4448-GB-RJ45) Expansion Module The Cisco Catalyst 4000 Series WS-X4448-GB-RJ45 line card extends Cisco's leadership in the modular switched Ethernet market, providing the industry's highest density auto-negotiating Gigabit Ethernet from the network edge directly to desktop computers. This line card provides RJ-45 ports with multispeed auto-sensing and auto-negotiating technology. This module provides wiring closet investment protection by allowing Fast Ethernet desktops today to migrate to Gigabit Ethernet in the future without replacing the switch line cards. The amount of oversubscription can be controlled by varying the number of ports. All ports can utilize Gigabit EtherChannel for high-speed interconnection applications. All ports use the standard IEEE 802.1x flow control (PAUSE frame) mechanism to control Gigabit Ethernet host traffic. 0 reviews |
 |
89 -Cisco (aimatm4e1) Expansion Module The Cisco T1/E1 Multiflex Voice/WAN Interface Cards ("Multiflex VWICs") support voice, and data applications in Cisco 2600, 3600 and 3700 multiservice routers. The Multiflex VWIC combines WAN Interface Card (WIC) and Voice Interface Card (VIC) functionality to provide unparalleled flexibility, versatility and investment protection from its many uses. Customers who choose to integrate voice and data in multiple steps preserve their investment in a T1/E1 WAN interface since the Multiflex VWIC can be reused in packet voice applications. 0 reviews |
 |
90 -Cisco Catalyst 6500 (WS-X6148A-GE-TX) (WSX6148AGETX) Expansion Module Cisco Catalyst 6500 48-Port 10/100/1000 Classic Interface Module with Power over Ethernet (PoE) option now supports jumbo frames and enhanced QoS capabilities (deeper and more per-port queues). Continues to support time-domain-reflectometer (TDR) for rapid cable fault detection. 0 reviews |
 |
91 -3Com PathBuilder 3C63416 Expansion Module The only certainty in networks today is that bandwidth demands will continue to increase. As more complex and time-sensitive applications such as voice and video are created for the desktop, a higher volume of traffic is generated throughout the network. This results in network bottlenecks that can cause performance problems within workgroups, to and from servers, and across the backbone.??Switching technology has proven to be the most cost-effective, flexible, and least disruptive way to add and manage bandwidth at every level of your network. 3Com switches enhance your network's performance by creating "microsegments" that are interconnected using a high-speed switching matrix. Microsegmenting means that a switched node does not share bandwidth with other nodes, even when they share the same port - which translates to dramatic increases in performance. 0 reviews |
 |
92 -Cisco Interface Module (NM-1FE1R2W) Expansion Module The Cisco 3600 platform offers a wide variety of serial connectivity modules to accommodate the range of application needs in customer networks. The serial network module family for the Cisco 3600 series assures customers that they can choose a serial connectivity solution that fits their requirements. Available as network modules or WAN interface cards, serial connectivity options offer several port densities, synchronous and asynchronous alternatives, and integrated channel service unit/data service unit (CSU/DSU). As modular components, they are easily and inexpensively field upgradable as customer requirements change.??This is 1-Fast Ethernet 1-Token Ring 2-WAN card slot network module for the Cisco 3600. 0 reviews |
 |
93 -Cisco (PVDM2-16U64=) (PVDM216U64) Expansion Module Cisco is the worldwide leader in networking for the Internet. Cisco provides the broadest line of solutions for transporting data, voice and video within buildings, across campuses, or around the world. Cisco solutions ensure that networks both public and private operate with maximum performance, security, and flexibility. 0 reviews |
 |
94 -3Com 7700 (3C16888) Expansion Module This 3Com Switch 7700 module delivers 48 ports of high-performance 10/100/1000 Mbps Ethernet switching over Category 5 twisted-pair copper cable. It support on-board or local Layer 2 switching (16Gbps between ports on the same module), allowing packets to remain local to the module, which reduces backplane and switch fabric loading. This reduces congestion in the network, minimizing packet loss, to help enable applications to run faster across the network. The reduction in latencies helps improve the quality of video and voice traffic across the network. Each module added to a chassis increases total switch performance; for example, six of these modules, when added to a Switch 7700 7-slot or 8-slot chassis, provides 240Gbps switching performance. 0 reviews |
 |
95 -Hewlett Packard Compaq (283192-B21) (283192B21) Expansion Module Plug-In Module, Cabling: Ethernet 1000Base-T, Ethernet 1000Base-TX... 0 reviews |
 |
96 -Hewlett Packard Compaq (364639-B21) (364639B21) Expansion Module The HP Memory Boards support up to four DIMMs each. These memory boards are front accessible providing unsurpassed levels of memory protection as well as scalability for the most memory-intensive applications. 0 reviews |
 |
97 -Cisco Catalyst 6500 (WS-SUP32-GE-3B=) (WSSUP32GE3B) Expansion Module Cisco Systems introduces the Cisco Catalyst 6500 Series Supervisor Engine 32, the next generation of supervisor engine for the Cisco Catalyst 6500 Series of modular switches targeted for the wiring closet. Supervisor Engine 32, with Policy Feature Card 3B (PFC3B), extends core innovations to the network edge. Based on the industry-leading Cisco Catalyst 6500 Series Supervisor Engine 720 technology, the Cisco Catalyst 6500 Series Supervisor Engine 32 allows customers to cost-effectively enable hardware-based security features, such as denial of service (DoS) mitigation to protect network application performance, and scalable support for multicast applications at the network edge. 0 reviews |
 |
98 -Compaq Ultra160 SCSI 160 MBps Expansion Module (190213-b21) Expansion Module Upgrading the StorageWorks Enclosure 4200 Family to Ultra3 takes less then 5 minutes and is as easy as swapping out the I/O module on the back of the unit. The I/O module is warm-swappable and can transfer data at up to 160MB/s. To achieve maximum transfer rates up to 160MB/s, you also need to have the storage enclosure connected to an Ultra3 adapter or controller, and Ultra3 Universal disk drives installed in the StorageWorks Enclosure 4200. All Ultra3 devices from Compaq are backward compatible with Ultra2 devices, so you can mix and match components in the same storage enclosure or server. However, Ultra2 devices will transfer data at 80MB/s. The StorageWorks Enclosure 4200 Family supports all Compaq Ultra2 (LVD) and Ultra3 (LVD) Universal (1-inch) hot-plug hard disk drives. 0 reviews |
 |
99 -Hewlett Packard MSL (320101-001) (320101001) Expansion Module THE HP STORAGEWORKS NETWORK STORAGE ROUTER (NSR) E1200-160 IS A KEY COMPONENT IN A COMPLETE DATA PROTECTION SOLUTION. THIS IS THE SAME ROUTER THAT IS INCLUDED IN THE MSL LIBRARIES WITH EMBEDDED ROUTERS. THE FIBER CHANNEL-TO-SCSI CARD PROVIDES ONE CUSTOMER SELECTABLE 1 GB/2 GB FIBER CHANNEL PORT (LC) AND TWO SCSI ULTRA3 (LVD) PORTS. 0 reviews |
 |
100 -Cisco (PVDM2-16U32) (PVDM216U32) Expansion Module The High-Density Packet Voice digital signal processor (DSP) Module (PVDM2) enables Cisco Systems Integrated Services Routers to provide high-density voice connectivity, conferencing, and transcoding capabilities in Cisco IP Communications solutions. Cisco Integrated Services Routers provide enterprises and service providers with a toll bypass solution by connecting their existing telephony equipment (such as private branch exchanges [PBXs], Key systems, analog telephones, and fax machines) to a toll-free data network; and eventually migrate customers to Cisco AVVID (Architecture for Voice, Video and Integrated Data) IP telephony solutions. 0 reviews |
← Back to Top Products
About Us |
Blog |
Coupons |
Mpire Labs |
Researcher |
Press Room |
CPA Widgets
Top Products | Jobs | Privacy Policy | Terms of Use | Contact Us
Top Products | Jobs | Privacy Policy | Terms of Use | Contact Us